Your present location:Home >> tyre coupling >> LAK tyre coupling
  • Name: LAK tyre coupling
  • NO.: 0028
  • Release time: 2015-09-30
  • Views : 68

QQ chat Friends Recommend

Features:

1.      Acts as Self-Aligning Agent

2.      Avoids Metal Contact

3.      Smoothness Vibration

4.      Gives Life to Bearings

5.      Removes Unpleasant Sound

6.      Takes End Level Shock Load

7.      Makes Easy Replacement

8.      Suits to Vertical Drive

9.      Avoids Cost Against Breakdown

10.    Decreases Temperature Rise

Cushion Shock Loads

It cushions Shock Loads and absorbs Torsional and Lateral Vibration real enemies of valuable machines. Vibrations that could produce undesirable sounds are also isolated. Transmission of gear noise and motor hum between shafts is reduced. Tanso tyre coupling provides just a steady constant dampening effect regardless of the direction of rotation and protects system components from fatigue failure.

No Lubrication or Maintenance

Tanso tyre couplings requires no lubrication prompting cleanliness that is especially desirable in such fields as food processing and textiles hence requiring no periodic maintenance as a result.

Simplified Design

No gears • No seals • No bearings • No wearing parts • No backlash clearance. Tanso tyre coupling forms one combined assembly, there is no relative movement inside of any part.

Easy Installation

Quick and Easy to install • No need for precise Shaft Alignment

Initial assembly of the Tanso tyre coupling is a simple operation. Alignment may be roughly checked by placing accurate measuring equipment, since small errors in misalignment are easily, accommodated by the Resilient Member. To replace the Flexible Member, simply loosen the Bolts, remove the Tyre and replace with a new one. It is not necessary to move either the driving or driven machines during the entire operation. The split Flexible Member is placed so that bearing on both sides is held between the Flanges and the Clamping Rings. The bolts are then tightened into place to grip the Resilient Member fully.

Safety

No metal to metal contact between two shafts, therefore. the cushion coupling insulates against flow of current from one shaft to the other No sharp edges, metal surfaces are finished all over.

Specific product description

 

Type

Nominal torque
Tn
N.m

Max speed
[n]
r/min

Bore diameter

Bore length

D

D1

S

Mass
kg

Moment of inertia
kg·m2

ddz

Y J1Z1

L L1

LAK1

63

5000

20-32

38-82

155

50

10

3.4

0.005

LAK2

100

5000

25-38

44-82

165

60

10

4.8

0.007

LAK3

160

4500

28-45

44-112

185

75

10

8.73

0.017

LAK4

250

4500

30-48

60-112

185

75

10

8.86

0.018

LAK5

500

3800

40-65

84-142

235

95

15

14.4

0.039

LAK6

630

3700

40-71

84-142

240

100

15

16.1

0.043

LAK7

1000

3000

45-75

84-142

295

120

15

29

0.147

LAK8

1600

2800

50-80

84-172

340

130

15

38.5

0.28

LAK9

2500

2300

50-90

84-172

385

145

25

53

0.42

LAK10

4000

1900

55-100

84-212

460

160

25

76.6

1.03

LAK11

6300

1700

60-110

107-212

530

180

25

128

2.38

LAK12

7100

1600

65-120

107-212

575

190

25

144

3.32

LAK13

10000

1500

75-140

107-252

630

225

25

198

5.45

LAK14

14000

1350

85-150

132-252

665

250

30

242

5.66

LAK15

20000

1200

100-180

167-302

740

280

30

330

10.3

LAK16

31500

1000

110-190

167-352

880

305

30

475

23.5

LAK17

50000

900

120-220

167-352

1040

345

30

701

50.2